Complex-farben.eu

HU COMPLEX PRODUCTS®
Josef Schellhorn GmbH • A-6334 Schwoich • Egerbach 50a • Tel.: +43 (0) 53 72 - 58 3
77 • Fax: 58 3 77 – 74
office@complex-farben.at •
STAINS • WAXES • PAINTS • OILS • VARNISHES • CARE PRODUCTS
COMPLEX IMPREGNATING PRIMER HU 109

TYPE OF PRODUCT:
A wood protection primer based on modified alkyd resins offering extreme depth of
penetration, quick drying time, low surface tension, excellent flow characteristics (dip
primer) and a pleasant odour thanks to the use of alternative solvents (ISOPAR
FLUIDS, breathable — porous, resistant to weathering and moisture).
COMPLEX IMPREGNATING PRIMER HU 109 is suitable for all hard and soft woods
including tropical woods, fibreboards and plywood.
NEW! Alternative solvents (ISOPAR FLUIDS and natural terpenes) eliminate
unpleasant odours!
AREAS OF USE:
Hazard class: 1 2 3
For impregnating and priming timber, roof beams, wooden houses, sub-
constructions for wet rooms, fences, pergolas, facade panelling, windows and
exterior doors, load-bearing or reinforcing wood in dry living areas and exterior
wood without permanent contact with the earth or water.
Once impregnated, the wood may be varnished, painted etc. as required.
UNSUITABLE AREAS OF APPLICATION:
Shelves, boxes etc. for storing foodstuffs or animal feed.
Wood used in beehives, saunas and greenhouses.
APPLICATION:
The wood should be dry (maximum moisture content 28%), clean and free from grease.
The product may be applied by painting, rolling, dipping, flow coating (no run-off marks)
or industrial methods. It should not be sprayed by hand or applied outdoors in
unprotected areas.
PROTECTIVE EFFECT:
B = Protects against blue stain, Iv = Protects against insects
W = Weather-resistant
Active ingredients: Dichlofluanide 0.50%, permethrin 0.05%
COLOUR SHADES:
Colourless, natural, light brown, dark brown
TECHNICAL DATA:
Spec. weight: Approx. 0.80 g/cm³, Viscosity: Thin, Odour: Pleasantly mild
Active ingredients: Dichlofluanide, permethrin
Minimum amount required: Undiluted 100 g/m², 1 l is enough for approx. 8 – 12 m²
depending on the absorbency of the wood
Dilution: Use undiluted – Clean tools using Complex KHV/ISO
Container sizes: 1 l; 2.5 l; 5 l; 25 l; 30 l; metal tin; 200 l drum; 1000 l container
Drying:
Dust-dry: Approx. 20 min.
Touch-dry: Approx. 40 min.
Stackable: Approx. 1 hr
Paintable: Approx. 4 hrs

STORAGE:
Shelf life: At least 2 years at normal temperatures in an unopened original container;
Storage class: VBF — AIII
QUALITY MONITORING:
The quality of our wood preservatives is monitored by the ÖHFI Wood Preservatives
Working Group and we are entitled to use their seal of quality.
PRECAUTIONARY MEASURES:
Wood preservatives contain biocidal active substances to protect against attack by fungi or insects. They should therefore be used only if such protection is stipulated or required in individual cases. Wood preservatives should be kept out of the reach of children and kept away from foodstuffs, drinks and animal feed; no eating, drinking or smoking while working; do not breathe in aerosol spray; use only in well-ventilated areas; not suitable for large-scale use in living areas (use non-biocidal products); do not allow products to enter sewerage or waterways; unused wood preservatives should be disposed of as special waste (code No. 55502) The information provided above has been carefully compiled in line with the latest testing technology and is intended to serve as a guideline. Given that products can be used and applied in a variety of ways, the information is non-binding, does not give rise to any contractual legal relationship and does not release the user from their obligation to check the suitability of our products themselves. Our Terms and Conditions of Delivery and Payment also apply.

Source: http://www.complex-farben.eu/uploads/media/TM_Impregnating_Primer_HU109.pdf