Microsoft word - safety data sheet -fusion plus polymer pink 25010

Safety Data Sheet

Issue Date:
08/05/09
Revision Number: 1
Material/Trade Name: Fusion Plus Polymer Pink
Substance Identification

Material/Trade Name

: 25010 – Fusion Plus Polymer Pink
Chemical Name
: Acrylic Polymer
Product Use
: Nail Polymer
: United Beauty Products Ltd
: Princewood Road
Telephone
: 01536 463350
: 01536 463390
Emergency Telephone : 01536 463350
Email

: sales@unitedbeauty.co.uk
2. Hazard Identification
EMERGENCY OVERVIEW
This information is based on findings from related or similar materials.
may cause irritation of the nose, throat, and lungs. • This product may contain particulate, not otherwise classified (Nuisance Dust)
Potential Health Effects, Signs and Symptoms of Exposure:
Primary Route of Entry
Eyes or skin (No absorption); inhalation of dust.
Eye
Higher concentration can irritate eyes. May cause eye irritation or damage. Repeated or prolonged exposure may cause allergic skin rashes.
Ingestion

Higher concentration can irritate respiratory system.
Inhalation

Possible temporary discomfort due to inhalation of dust concentration above the permissible exposure limit. Dust may cause irritation of the nose, throat, and lungs.
Sub-Chronic Effects

For Polymer: OSHA classifies this material as Particulates, Not Otherwise Classified. Eyes, skin and Respiratory tract may be irritated by gross overexposure to Particulates, Not Otherwise Classified, no matter how they are generated. Avoid inhalation of dust. Keep dust out of eyes to prevent possible irritation. For decomposition product: Methyl Methacrylate Monomer; Liquid or high vapor concentration can irritate eyes, respiratory system and cause skin rashes. Prolonged exposure can lead to headaches, nausea, staggering gait, confusion, drowsiness and unconsciousness. Repeated and prolonged over exposure may cause permanent brain and nervous system damage, allergic skin rashes, eye corrosion and permanent injury, as well as changes in liver and kidney function or damage. For Benzoyl Peroxide: repeated or prolonged contact may cause skin sensitization. Refer to Section 11, Toxicological Information for Details Page 1 of 5
Safety Data Sheet

Issue Date:
08/05/09
Revision Number: 1
Material/Trade Name: Fusion Plus Polymer Pink
3. Composition
This product is not considered hazardous by OSHA Hazard Communication Standard. 4. First-aid Measures
First Aid for Eye
Flush with water for 15 minutes, including under eyelids. Get medical help if discomfort persists. First Aid for Skin
Wash with soap and water. Get medical help if discomfort persists. First Aid for Inhalation
Remove to fresh air. Get medical help if discomfort persists.
First Aid for Ingestion

Rinse mouth out with water. Call doctor if amount was large. 5. Fire-fighting Measures
Flash Point (°F/°C)
Flammable Limit (vol%)
Auto-ignition Temperature (vol %)
Avoid extinguishing methods that generate dust clouds. Water streams can disperse dust into air, producing a fire hazard and possible explosion hazard. Fire-fighters should wear self -contained breathing apparatus. Polymer dust is combustible, explosive limits of the polymer particles suspended in air are approximately those of coal dust. 6. Accidental Release Measures
Sweep up to avoid slipping hazard. Keep airborne particulates at a minimum when 7. Handling and Storage
Observe precautions found on the label. Wash face and hands thoroughly with soap and water after handling and before eating, drinking or smoking. Avoid prolonged or repeated contact with skin. Avoid contamination. Use only with adequate ventilation. Store in cool, dry place away from heat, sparks, flame and direct sunlight. Close container after each use. Ground all metal containers when transferring. Use explosion-proof equipment. Store away from combustibles and incompatible materials. Polymer dust is combustible, explosive limits of the polymer particles suspended in air are Page 2 of 5
Safety Data Sheet

Issue Date:
08/05/09
Revision Number: 1
Material/Trade Name: Fusion Plus Polymer Pink
8. Exposure Controls
Use good local exhaust at processing equipment, including buffers, sanders, grinders and polishers. High temperature processing equipment should be well ventilated. Use explosion proof equipment. Provide ventilation if necessary to control exposure levels below airborne exposure limits. Personal Protective Equipment
Dust collectors are recommended for handling powder in bulk. Use safety glasses and have eye flushing equipment immediately available. Minimize contamination by following good industrial practice. Wearing nitrile, neoprene, pvc, latex or other impermeable gloves is recommended. Avoid breathing dust and mist. Use dust mask. 9. Physical and Chemical Properties
Stability and Reactivity
Stability: Stable
Incompatibility (Materials to Avoid): Strong oxidizing agents
Hazardous Decomposition Products: methacrylate monomers
Conditions to Avoid: Heating above 240 deg C, 464 deg F
Hazardous Polymerization: will not occur
Toxicological Information
Ecological Information

Ecotoxicological Information


Chemical Fate Information

Biodegradability
Chemical Oxygen Demand
To the best of our knowledge, the ecotoxocological and chemical fate properties have not been thoroughly investigated. Do not allow to enter drinking water supplies, waste water, or soil. Page 3 of 5
Safety Data Sheet

Issue Date:
08/05/09
Revision Number: 1
Material/Trade Name: Fusion Plus Polymer Pink
Disposable Considerations
May be disposed of in a landfill or incinerated. Follow Federal, State and Local regulations for disposal. For EU Member States, please refer to any relevant Community provisions relating to waste. In their absence, it is useful to remind the user that national or regional provisions may be in force. Transport Information
Regulatory Information

US Federal Regulations

This product contains the following hazardous air pollutants (HAP's) or ozone dipleting substances (ODS's), as defined by the U. S. Clean Air Act: • NONE This product contains the following chemicals listed under the U.S. Clean Water Act This product has not been cleared by the FDA for use in food packaging and/or other applications as an indirect food additive. This product is considered to be a hazardous chemical under the OSHA Hazard This product contains no chemicals considered to be hazardous waste under This product contains no chemicals regulated under Sec. 302 as extremely hazardous substances. This product contains no chemicals regulated under Sec. 304 as extremely hazardous chemicals for emergency release notification ("CERCLA " List). This product does not contain hazardous substances under the OSHA Hazard Communication Standard, and is not regulated under Section 311-312 (40 CFR 370). This product contains the following chemicals outlined in SARA Title III: Section 313: This product contains chemicals listed on the TSCA inventory or otherwise complies with TSCA premanufacture notification requirements. None of the chemicals listed have a SNUR under TSCA.
State Regulations

Page 4 of 5
Safety Data Sheet

Issue Date:
08/05/09
Revision Number: 1
Material/Trade Name: Fusion Plus Polymer Pink

International Regulations
CDSL: Canadian Inventory
Polymethyl methacrylate CAS# 9011-14-7 is on the DSL List. WHMIS = n/da Benzoyl Peroxide CAS #94-36-0 is on the DSL list. WHMIS = C, D2B, B4
EINECS: European Inventory:
PolyPure Pink:
• HAZARD SYMBOLS: Xi: Irritant
• RISK PHRASES: R36/37/38: Irritating to eyes, respiratory system and skin
• SAFETY PHRASES: S18: Handle and open container with care, S22: do not breath dust,
S24/25: avoid contact with skin and eyes, S38: in case of insufficient ventilation, wear
16. Other Information
Hazard Rating Systems (Pictograms)

The information presented herein was obtained from sources considered to be reliable. However, this information is provided without any warranty, expressed or implied, regarding its correctness or suitability for consumers intended use and/or application. For this and other reasons, we assume no responsibility and expressly disclaim liability for loss, damage or expense arising out of any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared expressly for this product. Use the materials only as directed. If the product is used as component of another product, the information contained within the MSDS may not be applicable. If one could have any concerns with or understanding this MSDS form, please direct all questions to INFOTRAC, Chemical Emergency Resources System at 1(800) 535-5053. The Safety Data Sheet is complied with reference to regulation 1907/2006/EC and amendments. Page 5 of 5

Source: http://www.starnails.bg/files/msds/Safety%20Data%20Sheet%20-Fusion%20Plus%20Polymer%20Pink%2025010.pdf

Doi:10.1016/j.ijcard.2008.11.139

International Journal of Cardiology xx (2008) xxx – xxxImpact of diabetes mellitus on survival in South East Asian patients withcongestive heart failure due to left ventricular systolic dysfunctionRaymond Lee a,⁎, Siew-Pang Chan b, Jennifer Wong c, Diana Lau d,Clinical Research Unit, Tan Tock Seng Hospital,c Casemix Department, Tan Tock Seng Hospital, Singapord Physiotherapy Departme

Dtc poster.ppt

Direct-to-Consumer (DTC) Advertising of Psychiatric Drugs in Popular Magazines: How are Mental Disorders Portrayed? Health Sciences Library System, University of Pittsburgh INTRODUCTION DEPRESSION ATTENTION DEFICIT HYPERACTIVITY DISORDER (ADHD) Prevalence In this study sample of DTC psychiatric drug ads:prescription medication is a controversial topic. CHARACTERISTIC Pr

© 2010-2017 Pharmacy Pills Pdf