Machine Spindle Bearings
The spindle bearings as fitted to this machine are oil lubricated by means ofa fully automatic lubricating system.
The oil used must meet with Cincinnati Machine specification P38, seepages 3- 9 to 3- 11.
The lubrication unit can be found mounted at the rear of thecolumn.
For correct checking procedure of this unit, refer to Chapter 8 ofthis manual. Fig. 46 Lubrication Chart - Air/Oil Spindle Oil Specification TYPE OF LUBRICANT CINCINNATI REFERENCE DESIGNATION LIGHT HYDRAULIC OIL AND LUBRICANT A dual purpose premium grade rust and oxidation inhibited petroleum fluid intended for service as an hydraulic oil and lubricant.
28,8 - 35,2 cSt AT 40C149 - 182 SUS AT 100C
Suppliers - European Market SUPPLIER PRODUCT NAME
and Affiliated CompaniesBritish Sun Oil Co. Ltd. Suppliers - USA Market P- 38 (HL- 32) Light Hydraulic Oil and Lubricant
The approved products under Spec. P38 (1988) are suitable for use in allCincinnati Machine tools requiring this viscosity hydraulic oil.
CAUTION: Oil products that were formerly approved under Spec. P38 willnot necessarily meet the requirements for use in the machine tool hydraulicsystems. Approved Product List
The following is a list of approved lubricants that meet the minimumrequirements of this specification. No inference should be made that allproducts are of the same quality. SUPPLIER PRODUCT NAME
Breslube - Division ofSafety- Kleen Canada Inc.
Chevron GST Oil 32Chevron Industrial Oil R&O 32
Page 3- 10 P- 38 (HL- 32)
Luscon Division Metal Lubricants Co. Luscon HF32; Hydralube 32
Mobil DTE Oil LightMobil Vactra Oil Light
Unacal Turbine Oil XD 32Unacal Unax RX 32
Page 3- 11 Grease Specification
P64 - GENERAL PURPOSE GREASE (LITHIUM BASED)
TYPE OF LUBRICANT CINCINNATI REFERENCE DESIGNATION LIGHT HYDRAULIC OIL AND LUBRICANT A premium grade general purpose lithium base grease for use in gear boxes, ball and roller typr bearings. N.L.G.I. No 2.
WORKED PENETRATION (ISO 2137 & ASTM D 217)
93 - 187 cSt AT 40C500 - 1000 SUS AT 100F
European - Market SUPPLIER PRODUCT NAME
and Affiliated CompaniesBritish Sun Oil Co. Ltd.
Chevron Dura- lith Grease 2Chevron Polyurea EP2
Page 3- 12 Suppliers - USA Market P- 64 (X- 2) Lithium Based Extreme Pressure Grease Approved Product List
The following is a list of approved lubricants that meet the minimumrequirements of this specification. No inference should be made that allproducts are of the same quality. SUPPLIER PRODUCT NAME
Mobilith AW 2Mobilith SCH 220Mobilux EP 2
Molu Alloy 3022- 2Mollub Alloy BRB 572Tribol 4020/150- 2
Page 3- 13
Reptile mites Introduction The reptile mite (Ophionyssus natricus) is a common and serious pest of reptile collections. These blood sucking parasites play an important role in a number of snake and lizard diseases. Diagnosis Reptile mites are small but visible to the naked eye. Ful y engorged mites may be several mil imetres long. Nymphs and unengorged adults are very much smaller
1. Eingangsfrage: nennen Sie einige Lungenfunktionstest die Sie kennen. Wie sind diese bei welcher Störung verändert. Wie verändert sich die Lungenfunktion in Narkose 2. Beschreiben Sie die Anatomie der Blutversorgung des Herzens. Normvarianten? 3. Umgang mit Patienten in der Anästhesie mit ß-Blockern? Absetzen? Weiter geben? Patienten die unter Antikoagulation stehen. ASS, Plavix, Marcum
Machine Spindle Bearings