511 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Original Article
STUDIES ON CORE IN COAT GASTRORETENTIVE TABLETS USING POROUS CARRIERS WITH CELLULOSIC POLYMERS AND NATURAL GUMS Putta Rajesh Kumar*, Hiremath Doddayya and S. Rajendra Reddy
Department of Pharmaceutics, N.E.T. Pharmacy College, Raichur -584103, Karnataka, India.
ABSTRACT The present study was aimed to develop a gastroretentive tablet that could deliver
antibiotic in stomach from the coat tablet for localized action and acid liable anti
secretory agent in duodenum from the enteric coated core. During tablet formulation
Studies on rheological characteristics of Clarithromycin coat granular blends showed
their free flowing nature and ease for compression to tablet. The compressed tablets
exhibited uniform post compressional characteristics. Evaluation of floating parameters
indicated results suits for the tablets to formulate core in coat tablets for release of
Clarithromycin in gastric pH and esomeprazole in alkaline pH to treat peptic ulcer
disease associated with h pylori bacteria. The formulations exhibited uniform rheological
and post compressional properties. The drug content was found to be uniform and
consistent in all formulations. The tablet showed density < 1 facilitated tablets floating
ability over 0.1N HCl with minimum floating lag time. In vitro release studies showed
that T6C6 formulation exhibited better release for both the drugs in simulated gastric and
intestinal fluids for 12 h. The study revealed the role of porous carriers, cellulosic
polymers and natural gums on drug release profiles of esomeprazole core in
clarithromycin coat gastroretentive tablets in duodenal ulcer treatment. Key Words: Floating tablet, porous carrier, xanthan gum, guar gum and duodenal ulcer. *Corresponding author: Putta Rajesh Kumar, Department of Pharmaceutics, N.E.T. Pharmacy
College, Raichur -584103, Karnataka, India. Running Title: Gastroretentive tablets design and in vitro evaluation for peptic ulcer. Subtitle: Studies on Core in Coat Gastroretentive tablets using Porous carriers with Cellulosic
polymers and Natural gums INTRODUCTION
Development of oral controlled release systems formulation of drug in a gel forming
polymer such as semi synthetic derivatives of cellulose, it swells in the gastric fluid with a bulk
density less than one . Floating drug delivery systems have a bulk density lower than gastric
fluids and therefore remain floating in the stomach unflattering the gastric emptying rate for a
prolonged period. The drug is slowly released at a desired rate from floating system due to
512 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012
extended gastric residence time leads to better control over fluctuations in plasma drug
concentration. Peptic ulcers are defects in gastric or duodenal mucosa extend through muscularis
mucosa as indicated in figure 1. An ulcer may develop if there is an alteration in balance between
acid amount and mucus defense results in damage of lining in the stomach or duodenum by
The patients suffering from peptic ulcers with h pylori infection requires medication that
addresses immediate symptomatic relief followed by rapid ulcer healing effect. The medications
currently available were conventional separate dosage forms and are erratically absorbed in the
stomach. Clarithromycin has a t1/2 of 3.5±0.5 h with an oral bioavailability of 50% and
Esomeprazole has a half life of 1.25±0.25 h and has a bioavailability of 48% when administered
orally. Esomeprazole has been clinically successful in a dose 20 mg bid [2-4]. Clarithromycin at
a dose of 500 mg bid, has been reported to inhibit h pylori in humans [5-6]. Hence treatment of
peptic ulcer disease with antibiotic Clarithromycin, along with proton pump inhibitor
esomeprazole, would be beneficial and effective. Based on above rationale, this investigation is
planned to develop floating type of ‘coat’ tablets containing clarithromycin, to release antibiotic
in stomach and increase its residence time. Further small enteric coated tablets of esomeprazole
to release the drug in small intestine, will be developed as a ‘core’ tablet. The clarithromycin
‘coat’ surrounds the esomeprazole ‘core’ so that both the drugs are dispensed as one unit and to
release one medicament in stomach and the other in small intestine. MATERIALS AND METHODS Active pharmaceutical ingredient and Reagents: Esomeprazole magnesium trihydrate were procured from Aurobindo pharma limited.
Croscarmellose sodium, Crospovidone, Sodium starch glycolate gifted by Danmed
Pharmaceuticals Pvt Ltd, Hyderabad. Lactose DC and Mannitol DC were procured from SD Fine
Chemicals Limited. Eudragit L 30 D55, Colorcon (Acryl EZE) was supplied by Medreich
Limited, Bangalore. Clarithromycin obtained from Limited, Bangalore. Polypropylene, Calcium
silicate, Aerosil purchased for from Sigma Aldrich, Bangalore. Xanthan gums, Guar gum,
HPMC K4M, MCC were purchased from INR chem and yarrow chemicals, Mumbai. Formulation of esomeprazole core tablet by direct compression and enteric coating : The
esomeprazole core tablets were prepared by direct compression technology. The uniform blend
of powder containing esomeprazole and direct compressible vehicles was studied for rheological
characteristics. The blend of powder was then compressed to tablets using 6 mm flat punches. To
protect esomeprazole from gastric acid and to deliver in duodenum the core tablets were coated
with enteric coating polymer, Acryl EZE. Preparation of clarithromycin coat granules by wet granulation for compression coating
[8-9]: The ingredients with drug, porous carrier, effervescent agent and matrix carrier for a batch
250 tablets were accurately weighed, passed through # 100 sieve and blended uniformly. The
powder blends CTP1 to CTP4, D1 and D2 were wet granulated with distilled water and starch
paste (15% w/w) as binder. The wet mass obtained was passed through # 16 sieve then dried in an oven at 40°C for 4 h and passed through sieve # 20. Later, talc and magnesium stearate as
required were added and blended. The coat granules were studied for flow properties and used
for compression coating over esomeprazole cores. Then the powder blends of various batches
513 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012
formulations 5 to 20 were prepared and are wet granulated with guar gum (1.5% w/w) as binder
in water to produce wet mass. Further ingredients of S4 to S10 formulations were wet granulated
with (1.5% w/w) each of xanthan gum, guar gum and HPMC K4M as binder in water to produce
wet mass. Later for formulations T4 to T6 the powder blends of ingredients were wet granulated
with (1.5% w/w) each of guar gum, xanthan gum and HPMC K4M as binder in water to produce
wet mass. The wet mass of respective coat formulations was then passed through mesh # 14,
dried in an oven for 4 h. Later the dried coat granules were passed through mesh # 16. Later, talc
and magnesium stearate as required were incorporated as glidant and lubricant and blended
thoroughly. The granules were studied for their rheological parameters and further used for
compression coating over esomeprazole core tablets. Preparation of core in Coat tablet : First half of the weight of coat tablets containing
clarithromycin granules was placed into the die cavity (13mm) and then enteric coated core
tablets of esomeprazole (6 mm) was placed into the same die cavity, the core tablet was adjusted
and centered. The remaining half of the coat granules was placed over the core tablet so that the
core is completely and uniformly surrounded by the coat granules and was then punched in a 10
station tablet press (PP1D, Chamunda) at 4-6 kg/cm2 hardness. In each batch 300 tablets were
manufactured. These tablets were studied for compression characteristics and later, in vitro
dissolution studies were carried out. Evaluation of rheological properties of powder/granular bed : (Prabhakar Reddy
Veerareddy., 2010). Bulk density : Bulk density was determined (Konark instruments, India) by placing the
powder/granules blend in a measuring cylinder and the total volume was noted. The weight of
powder/granule bed was determined in a Dhona 200 D electronic balance. Bulk density was
calculated by using the formula. Bulk density = Total weight of powder / granules / Total volume
of powder / granules. Average of three densities of powder/granule were taken and tabulated.
(n=3). Similarly Tappped density was also studied. Compressibility index : Compressibility index was determined by placing the
powder/granules in a measuring cylinder and the volume (V0) was noted before tapping. After
100 tapping again volume (V) was noticed. Compressibility index = (1- V/ V0) X 100. Where V0
= volume of powder/granules before tapping and V = volume of powder/granules after 100
tappings. (n = 3). Angle of repose (°θ) : Angle of repose was determined by measuring the height and radius
of the heap of the powder/granule bed. A cut stem funnel was fixed to a stand and bottom of the
funnel was fixed at a height of 3 cm from the plane. Powder/granule was placed in the funnel and
allowed to flow freely. With the help of vernier calipers (Mitutoyo, Japan) the height and radius
of the heap were measured and noted. Average of triplicate reading were noted (n = 3). Tan ø = h
/r. where h = height of heap of powder/granule bed and r = radius of heap of powder/granule bed. Evaluation of compressional characteristics of the tablets : Thickness test : The tablets were evaluated for their thickness using a micrometer
(Mitutoyo, Japan). Average of three readings were taken and the results were tabulated (n = 3). Diameter test : The tablets were evaluated for their diameter using a micrometer (Mitutoyo,
Japan). Average of three readings were taken and tabulated (n = 3).
514 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Hardness test : The tablets were evaluated for their hardness using Pfizer hardness tester.
Average of three reading were taken and tabulated (n = 3). Determination of drug content : Ten core tablets of esomeprazole was crushed into powder
in a mortar and 100 mg of powder was taken in a volumetric flask containing distilled water and
kept aside with constant shaking for 24 hours to extract the total drug present in the tablet. Then
the absorbance of the solutions was measured after suitable dilution at 203.5 nm against drug
devoid methanol as blank. Averages of triplicate readings were taken. Similarly Coat tablets of
Clarithromycin was crushed into powder in a mortar and 100 mg of powder was taken in a
volumetric flask containing dry ethanol and kept aside with constant shaking for 24 hours to
extract the total drug present in the tablet. Then the absorbance of the solutions was measured
after suitable dilution at 211 nm against drug devoid dry ethanol as blank. Averages of triplicate
readings were taken. Density measurement : The apparent density of the tablets was calculated from their
volumes and masses. The volumes V of the tablets were calculated from their height h and radius r using micrometer. Volume of the tablets was calculated by using the following equation V = ∏
x r2 x h. Average of three readings were taken and tabulated (n = 3). Buoyancy lag time : The buoyancy of tablets was studied at 37 ± 0.5 °C, in 100 ml of 0.1N
HCl. A glass beaker containing 100 ml of 0.1N HCl was taken, in which a tablet was placed for
observation. The duration of time taken to float the tablet was observed visually. Average of
three readings were taken and tabulated (n = 3). Duration of floating time : (Pare A et al., 2008). A glass beaker containing 100 ml of 0.1N
HCl was taken, in which a tablet was placed for observation. The total duration for which a tablet
remains floating was recorded as duration of floatation. Average of three readings were taken
and tabulated (n = 3). In vitro dissolution studies : (Mukesh C. Gohel et al., 2006) A modified dissolution
apparatus was fabricated from a 100 ml glass beaker, by attaching an S-shaped side arm (glass
tube) and capable of holding 70 ml of dissolution medium (simulated gastric fluid/simulated
intestinal fluid). The medium was stirred on a magnetic stirrer. A burette was mounted above the
beaker to deliver the dissolution medium at a flow rate of 2 ml/min. The tablet was put in the
modified beaker containing 70 ml of dissolution medium and the medium was stirred at 75 rpm.
The temperature of the medium was maintained at 37 ± 0.5 ºC. From the burette, simulated
gastric fluid was added at a rate of 2 ml/min. Samples of 1 ml were collected at predetermined
time intervals for 2 h. The dissolution was further carried out with the same tablet by replacing
the dissolution media with buffer pH 9.0 for 10 h and samples of 1 ml were withdrawn analyzed
spectrophotometrically. All the studies were carried out in triplicate, (n = 3). RESULTS Table 1. Rheological parameters of preliminary Clarithromycin coat formulations. Angle of repose (Øo) density±S density±S 515 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Ctp III 32.20±0.34 29.96±0.40 0.33±0.01 Ctp IV 27.63±0.32 25.70±0.43 0.42±0.06 516 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Table 2. Floating parameters of preliminary Clarithromycin coat formulations - I. F code Tablet Floating lag time and Duration of Floating studies observations
Tablet sank to the bottom; swollen mass formed and disintegrated in 6 sec but did not
Tablet sank to the bottom , swelled by slight erosion, floating lag time is 38 min and
Ctp III Tablet sank to the bottom hydrated, floating lag time is 3 min and duration of floating is
Ctp IV Tablet sank to the bottom hydrated and swollen, floating lag time is 10 min, duration of
Tablet sank to the bottom hydrated, swelled and eroded but did not float to the surface.
Tablet sank to the bottom hydrated, swelled and eroded but did not float to the surface.
Tablet sank to the bottom swelled and eroded but did not float to the surface.
Tablet floated after 3 sec to surface with effervescence, Core tablet released after 15
min and sank to bottom, coat tablet completely eroded in 22 min
Tablet floating lag time is 5 sec, core tablet released after 5 min and sank to bottom,
Tablet floating lag time is 3 sec, core tablet released after 8 min and sank to bottom,
Tablet floating lag time is 2 sec, core tablet released after 7 min and sank to bottom,
Tablet floating lag time 3 sec, core tablet released after 11 min and sank to bottom, coat
517 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012
Tablet floating lag time 2 sec, core tablet released after 8 min and sank to bottom, coat
Tablet floating lag time is 3 sec, erosion of particles with effervescence and sank to
bottom, core tablet released after 10.5 min, coat tablet eroded in 28 min.
Tablet sank to the bottom hydrated and swelled but did not float to the surface.
Tablet sank to the bottom hydrated, swelled with simultaneous erosion, about a half of
tablet without core floated to surface after 5 min , eroded with simultaneous
effervescence and particles sank to bottom, coat tablet eroded in 22 min
Tablet sank to the bottom hydrated and swelled but did not float to the surface. Tablet sank to the bottom hydrated, swelled with simultaneous erosion due to
effervescence about a half of tablet without core floated to surface after 3 min , eroded
with effervescence and particles sank to bottom, coat tablet eroded in 15 min
Table 3. Floating parameters of preliminary Clarithromycin coat formulations - II.
Tablet floating lag time is 3 sec with hydration and swelling of tablet, duration of floating
is 30 min, after 30 min tablet sank to the bottom and intact for 6 hrs
17C Tablet sank to the bottom, swelled and eroded but did not float to the surface.
Tablet sank to the bottom, hydrated, swelled and eroded with effervescence in 5 min, but
Tablet sank to the bottom, swelled hydrated with slight erosion of surface, but did not float
Tablet sank to the bottom, hydrated swelled and slightly eroded and but did not float to the
Tablet sank to the bottom, swelled and disintegrated, but did not float to the surface.
Tablet sank to the bottom, swelled and not disintegrated, but did not float to the surface.
Tablet floating lag time is 4 sec, duration of floating is 1 h 50 min, core released 1 h 22
Tablet floating lag time is 3 sec, duration of floating 15 min with slight erosion, core
Tablet floating lag time is 2 sec, core released after 2min. Effervescence, erosion, tablet
eroded in 5 min, but did not float to the surface.
Tablet floating lag time is 35 min; duration of floating is 55 min and no erosion of tablet.
S10 Tablet floating lag time is 3 sec, Tablet swelled; core released after 4 min, coat tablet
eroded in 7 min, but did not float to the surface.
518 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Table 4. Rheological parameters of T4 to T6 Clarithromycin coat formulations granules: Angle of repose (Øo) ± SD Bulk Tapped Carr’s Density Density compressibility Index± SD ±0.004 ±0.009 ±0.002 ±0.005 ±0.011 ±0.007 Table 5. Tablet Floating lag time and Duration of Floating studies, core release studies of T4 to T6 core in coat formulations. Parameters
Table 6. Post compressional parameters of core in coat tablets of Esomeprazole magnesium trihydrate and Clarithromycin: Hardness Apparent Variation Diameter Thickness (kg/cm2) (mg±SD) (mm±SD) (mm±SD) (mg±SD) 519 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Table 7. In vitro release studies of clarithromycin and esomeprazole magnesium trihydrate from SGF and SIF in modified dissolution apparatus in media SGF pH 3 (2h) and SIF pH 9
of drug (mg) release of drug (mg) release of drug (mg) release
ycin in SG larithrom rihydrate in SIF T agnesium eprazole M 520 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 Table 8. Drug release kinetics of core in coat formulations of Esomeprazole magnesium trihydrate and Clarithromycin F.Code Core/coat C20 (min) Slope(m) Regression (r) Figure 1. Incidence of peptic ulcers in human stomach and duodenum by H. pylori eprazole larithrom g) 175 released (m 100 released (m ulative am ulative am Time (min) Figure 2. Dissolution study of T6C6 - Cumulative amount release of clarithromycin from T6 with HPMC K4M and esomeprazole magnesium trihydrate from C6 with Mannogem EZ. 521 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012 DISCUSSION
Treatment of peptic or gastric ulcer requires an antibacterial agent like clarithromycin, a
broad spectrum antibacterial agent, which is effective against peptic ulcer causing H pylori
bacteria and a gastric acid suppressing drug like esomeprazole magnesium trihydrate, a proton
pump inhibitor. Clarithromycin has its absorption window in stomach and where as
esomeprazole is absorbed well from small intestine because of its instability in stomach.
The enteric coated core tablets containing 20 mg of esomeprazole magnesium trihydrate
present within coat formulation containing clarithromycin of 250 mg dose was dispensed as a
single unit. Porous polymers, gas generating agents and other excipients were studied in
preliminary studies for their suitability towards formulation of proposed core in coat
gastroretentive tablets. The developed formulations were studied for the following rheological
properties. All the above formulations showed good rheological properties as showed in table 1
but the preliminary formulations after compaction not exhibited desired flow parameters as
indicated in table 2 and 3 which might be due to the unsuitable polymer blend for floating ability.
Based on these results further formulations were optimized to achieve desired tabletting and
floating properties for tablets. Clarithromycin coat powder blends and granules were
compression coated over enteric coated esomeprazole cores and the tablets were found to be
uniform with respect to their weight variation, thickness and hardness. Evaluation of floating lag
time and duration of floating indicated that only a few formulations showed the desired
properties of floating lag time in sec, duration of floating, core tablet release after 2 h, all
formulations has the hardness of 4 - 6 kg/cm2.
The rheological characteristics of Clarithromycin coat powder and granular blends indicated that
they are freely flowable and easily compressible as given in table 4. Later results in table 5
revealed floating parameters and the suitability of formulations as gastroretentive tablets. The
tablets showed minimum lag time and extended duration of floating. Tablets showed uniform
compression properties. With uniform drug content as represented in table 6. The lactose DC
containing core tablets showed lag time of 03 min and Mannitol DC containing core tablets
showed lag time of 15 min to release esomeprazole in pH 9.0 this is due to time taken for
rupturing and solubilization of Acryl EZE enteric coating over core tablets which is also
observed during in vitro dissolution studies of core in coat tablets.
The in vitro dissolution study data in table 7 indicates that from T4C4 tablet it showed
Clarithromycin from T4 coat released 20% of drug in 11.6 min and 244.06 mg (97.63%) in 120
min from 245.33 mg dose. The release followed zero order kinetics with slope value 1.9725 and
correlation coefficient (r) of 0.9477. Esomeprazole from C4 core released 20% of drug in 100
min and 18.024 mg (90.11%) in 600 min from 19.73 mg dose. The release followed zero order
kinetics with slope value 0.0563 and correlation coefficient (r) of 0.9848 data given in table 8.
The In vitro dissolution study of T5C5 showed Clarithromycin from T5 coat released 20% of
drug in 10.6 min and 246.02 mg (98.14%) in 120 min from 246.67 mg dose. The release
followed zero order kinetics with slope value 1.9660 and correlation coefficient (r) of 0.9344.
Esomeprazole from C5 core released 20% of drug in 102 min and 18.318 mg (91.58%) in 600
min from 19.94 mg dose. The release followed zero order kinetics with slope value 0.0774 and
The In vitro dissolution study of T6C6 showed Clarithromycin from T6 coat released 20% of
drug in 09.0 min and 248.08 mg (99.23%) in 120 min from 248.34 mg dose. The release
followed zero order kinetics with slope value 1.9552 and correlation coefficient (r) of 0.9057.
Esomeprazole from C6 core released 20% of drug in 60.9 min and 19.016 mg (95.07%) in 600
522 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012
min from 19.74 mg dose. The release followed zero order kinetics with slope value 0.1054 and
correlation coefficient (r) of 0.9665 indicated in figure 2. The in vitro dissolution study of core
in coat tablets in modified dissolution apparatus showed that the Clarithromycin was released
from coat tablets for the first 2 h in SGF of pH 3.0; later esomeprazole magnesium trihydrate was
released from core tablet for the next 10 h in SIF of pH 9.0.
The study explored the use of porous carriers like calcium silicate, polypropylene, aerosol owing
to their merely lesser density and compaction ability attained by wet granulation resulted in
formulation of novel floating tablets by successful incorporation of porous agents. Later HPMC
K4M, xanthan gum and guar gum as matrix carriers were showed swelling up on hydration
results in CO2 entrapment in the system pores due to reaction between sodium bicarbonate and
gastric acid results in buoyant tablet with desired floating properties and in vitro drug release.
Authors acknowledge Aurabindo Pharma Ltd. Hyderabad and Medreich Labs, Bangalore for
providing gift samples of esomeprazole and clarithromycin.
REFERENCES 1) Chein YW. Oral drug delivery and delivery systems. In: Chien YW, editor. Novel drug
delivery systems. New York: Marcel Dekker Inc. 1992; 139-140.
2) http://www.rxlist.com//cgi/generic3/Esomeprazole_cp.htm. (2010). online accessed on
esomeprazole. (2010). online accessed on september 21.
4) http://www.cadth.ca/media/pdf/108_No12_magnesium_edrug_e.pdf. (2010). online accessed
5) Jianhua Zheng; Chaowu Liu; DecaiBao; Yanjun Zhao; Xiaojun Ma. (2006). Preparation and
evaluation of floating bioadhesive microparticles containing clarithromycin for the
eradication of Helicobacter pylori. Journal of Applied Polymer Science. 102: 2226-2232.
6) Rajinikanth P.S; Mishra B. (2008). Floating in situ gelling system for stomach site specific
delivery of clarithromycin to eradicate H. pylori. J. Control Rel. 125: 33-41.
7) Anroop B Nair; Rachna Gupta; Rachna Kumria; Shery Jacob; Mahesh Attimarad. (2010).
Formulation and evaluation of enteric coated tablets of proton pump inhibitor. Journal of
basic and clinical pharmacy. 1(4): 215-221.
article.pdf. (2010). online accessed on august 11.
9) http://www.pharmpedia.com/Tablet:Manufacturing_methods/Granulation. (2010). online
523 | J App Pharm 01(04): 511-523 (2012) Kumar et al., 2012
10) Prabhakar Reddy Veerareddy and Rajendra Prasad Manthri. (2010). Formulation and
evaluation of compression coated piroxicam tablets for colon specific drug delivery. Acta
11) Ravi Kumar; Patil M.B; Patil S.R; Paschapur M.S. (2009). Formulation and Evaluation of
Effervescent Floating Tablet of Famotidine International Journal of PharmTech Research.
12) Putta Rajesh Kumar; Rajesh Tatavarthi; Mallikarjuna Gouda M; Somashekar Shyale and
Shanta Kumar SM. (2011). International journal of pharmaceutical sciences review and
13) Siepmann; Bodmeier R; Streubel J. (2002). Floating microparticles based on low density
foam powder. International journal of pharmaceutics. 241: 279-292.
14) Dinesh Kumar P; Grace Rathnam; Prakash C.R; Saravanan G; Karthick V and Panneer
Selvam T. (2010). Formulation and characterizatioin of bilayer floating tablets of ranitidine.
15) Pare A; Yadav S.K and Patil U.K. (2008). Formulation and evaluation of effervescent
floating tablet of amlodipine besylate. Research J. Pharm. and Tech. 1(4): 526-530.
16) Gohel M.C; Mehta P.R; Dave R.K and Bariya N.H. (2006). A more relevant dissolution
method for evaluation of floating drug delivery system Dissolution technologies. (2): 20-23.
FORÅRSCAFÉ Faaborg Gymnasium 24.april 2012 Billedkunst, Musik & Drama Til gymnasiets årlige forårscafé præsenterer de kunstneriske fag musik, billedkunst og drama deres eksamensprojekter. Der vil være noget for mange sanser - dejlige billeder, flot musik og spændende teater – og al kunsten vil kunne blive suppleret med noget godt at spise og drikke. Som det fremgår af prog
“FLESSIBILI” IN RUSSIA Soma Engineering ha fornito al gigante del converting russo Borodino una macchina per la stampa flexo UV, caratterizzata da fascia di 800 mm e configurazione a tamburo centrale. D.B. su differenti supporti plastici, di diver-ding che comprende 30 aziende in-dipendenti) produce imballaggi edetichette per molti importanti marchi nelÈ stata apprezzata anche