Heterojunction Properties of p-CuO/n-CdS Diode Wannapa Chumnearpeut Department of Physics, Faculty of Science, King Mongkut’s Institute of Technology LadkrabangFabrication andCharacterizationof Heterojunction for CdS Thin Films and CuAlO2 Ceramic Pill Substrate Adison Nopparuchikun Department of Physics, Faculty of Science, King Mongkut’s Institute of Technology LadkrabangSynthesis of Titanium Dioxide Nanotube using Anodizing Technique Chaiyaput Kruehong Department of Chemical Engineering Faculty of Engineering, Khon Kaen UniversityMicrostructure Characterization and Multi-Fractal Behaviors of Dielectric La2O3 Films Prepared by the Ion Beam Assisted Electron-Beam Evaporation Huiqing Fan State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern The Effect of Granule Morphology and Composition on the Compaction Behavior and Mechanical Properties of 92% Alumina Spray Dried Granules Kritkaew Somton National Metal and Materials Technology Center
Magnetic Properties of Porous Barium-Hexaferrite Ceramic Fabricated by Powder Injection Moulding
Nutthita Chuankrerkkul Center of Innovative Nanotechnology, Chulalongkorn University and Metallurgy and Materials Science Research Institute, Chulalongkorn UniversityBismuth Vanadate (BiVO4) Powder Prepared by Sol-gel Method Suchanya Kojinok Department of Chemistry, Faculty of Science, Maejo UniversitySynthesis of Bismuth Sodium Titanate Nanopowder by High-Energy Ball Milling Technique Chontira Sangsubun Department of Physics, Faculty of Science, Thaksin UniversityEffect of Milling Method on The Particle size of Calcined 0.65PMN-0.35PT Powder Arjin Boonruang Thailand Institute of Science and Technological Research Preparation of In-House Alumina Target for Rf Magnetron Sputtering Jutharat Chiewwattanakul School of Energy, Environment and Materials, King Mongkut’s University of Technology Thonburi A Comparative Study of Mechanical Properties and Economic Evaluation of Roof Tiles filled with Alternatives to Chrysotile Siripang Kaewsunthon Faculty of Engineering, Thammasat UniversityImprovement of Gloss and Adhesion of the Hydrophobic Film coated on Transparent Glass On-uma Nimittrakoolchai National Metal and Materials Technology CenterSelf-Organized Anodic TiO2 Nanotube Arrays: Effect of Water Additive on Nanotube Cell Orientation Sorachon Yoriya National Metal and Materials Technology Center Biomedical Materials and Devices
Electrodeposition of Graphene Oxide and Silver Nanoparticles on Platinum Electrode for Enzymeless Hydrogen Peroxide Detection Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart University and Center for Advanced Studies in Nanotechnology and Its Applications in Chemical, Food and Agricultural Industries, Kasetsart Effect of Poly(vinyl pyrrolidone) on Antibacterial Activity of Styrene-Acrylonitrile Copolymer/Silver Nanocomposite Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart UniversityPolymeric Eutectic Drug Delivery System Sarun Tuntarawongsa Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn UniversityCharacterization and Drug Behavior in Shellac Wax – Poloxamer Matrix Tablets Fabricated with Mold Technique Chai-ek Choncheewa
Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn University
Crystallization of Lithium Disilicate Glass Ceramics for Dental Crowns Naruporn Monmaturapoj National Metal and Materials Technology CenterDevelopment of High Porosity Scaffold Containing Extract of Sonneratia caseolaris Seed Orn Setthajindalert Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn UniversityRole of Aluminum Monostearate on Heat Treated-Chitosan Sponges Properties Kotchamon Yodkhum Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn UniversityCetirizine Dihydrochloride Tablets Comprising Different Lubricants with High Loaded Colloidal Silicon Prachya Katewongsa Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn UniversityCytotoxicity of Active Compounds from Centella asiatica on Astrocytic Cultured Cell Supawadee Punpae Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn UniversityComparative Study on Quality and Corrosion Resistance of Soldered and Laser-welded Joint of Ni-free Co-Cr Alloy Using Filler Piyarach Eutrirak Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn UniversityFabrication and Optimization of Amperometric Biosensor Based on Immobilization of Glucose Oxidase on PEGDE Modified Silk Fibroin Membranes Piyarut Moonsri Department of Chemistry, Faculty of Science and Technology, Phetchabun Rajabhat UniversityEffects of Argon Plasma Treatment on the Wettability and Surface Topography of Gelatin Film Juthathip Saelee Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn UniversityHydrogen Bonding of Imidazole/Imidazolium Components in Decavanadate Salt, [2-MeImH]2[Zn(2- MeIm)4]2[V10O28] Samroeng Krachodnok Department of Applied Chemistry and Center for Innovation in Chemistry, Faculty of Science, Lampang Rajabhat Effect of Borax Solution on Delayed Setting and Mechanical Properties of Plaster of Paris Chanya Chuenarrom Faculty of Dentistry, Prince of Songkla UniversityPrediction of Pregelatinized Arrowroot Starch as Tablet Disintegrants using Artificial Neural Networks Vipaluk Patomchaiviwat Department of Pharmaceutical Technology, Faculty of Pharmacy, Silpakorn UniversityClinical Trial Results of Absorbable Chitosan Derivative-based Hemostat Boonlom Thavornyutikarn National Metal and Materials Technology CenterAntimicrobial Activity and Cytotoxicity of Nanosilver Loaded 3DP Calcium Phosphate Matrix Phetrung Phanphiriya National Metal and Materials Technology CenterManufacturing of Implantable Biomedical Devices by Metal Injection Moulding Process Mohd Afian Omar
Materials for Energy and Environment MEE-PP-01 Dissolved Oxygen Sensor Film Using Ruthenium Polypyridine Complex as Luminophore Chanissnun Su-Ngam Department of Chemistry, Faculty of Science, Kasetsart UniversityTitanium Dioxide Nanostructures synthesized by Sonochemical – Hydrothermal Process Narongdet Wongpisutpaisan College of Nanotechnology, King Mongkut’s Institute of Technology LadkrabangElectrochemical Double Layer Capacitor of Mesoporous TiO2 as formed in Aqueous based Electrolytes Pacharee krongkitsiri Department of Science and Mathematics, Faculty of Industry and Technology, Rajamangala University of Technology IsanLiquid-Liquid Extraction as a Sample Preparation for Determining Eight Polycyclic Aromatic Hydrocarbons in Extender Oil National Metal and Materials Technology CenterCompressive Strength and Drying Shrinkage of Fly Ash and Silica Fume Blended Cement at High Volume Cement Replacement Watcharapong Wongkeo Advanced Cement-Based Materials Research Unit, Department of Physics and Materials, Faculty of Science, Effect of Limestone, Fly Ash and Ground Granulated Blast-furnace Slag as a Cement Replacement on Properties of Binary Blended Cement Pailyn Thongsanitgarn Department of Physics and Materials Science, Faculty of Science, Chiang Mai UniversityBiodiesel Production from Tung Seed Oil by Microwave Coupling with Ultrasonic Techniques Panan Supakaew Department of Chemistry, Faculty of Science, Maejo UniversityThe Preparation of Activated Carbon from Longan by Steam Fluidization Method Nipaporn Udomchokwiwat Department of Chemistry, Faculty of Science, Maejo UniversityApplication of Para Rubber Latex Mixed with Organic Dyes as Printing Ink for Biodegradable Plastic Tanathorn Techochaignam Department of Printing and Packaging Technology, King Mongkut’s University of Technology Thonburi Novel Absorbent of Sodium Alginate/Cellulose and Natural Rubber for Adsorption Behavior of Pb(II) Ions Sa-Ad Riyajan Department of Materials Science and Technology, Faculty of Science, Prince of Songkla University Comparison Energy Harvesting Performance of PZT Stack and PVDF Stave in Series and Parallel Coupled Through Standard Approach Prissana Rakbamrung Faculty of Education, Suratthani Rajabhat UniversityFrequency Tuning for Cantilever Beam with Bonded Piezoceramics Panu Thainiramit Material Physics Laboratory, Department of Physics, Prince of Songkla UniversityUpconversion Luminescence of Yttrium Oxysulfide Co-doped with Rare Earth Elements Uthaiwan Injareon Thailand Institute of Nuclear TechnologyPreparation of Cobalt Oxide and Manganese Oxide Nanoparticles for Uses in Supercapacitor Applications Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart University and Center for Advanced Studies in Nanotechnology and Its Applications in Chemical, Food and Agricultural Industries, Kasetsart Fabrication of Palladium Nanoparticles Coated Graphene Electrodes for Use in Direct Methanol Fuel Cell Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart UniversityBiodiesel Production from Waste Cooking Oil using Supercritical Methanol Process Sudaporn Sukchinda College of Environmental Science, Kasetsart University Electrodeposition of Platinum Nanostructures on Graphene Electrodes for Uses in Fuel Cells Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart University and Center for Advanced Studies in Nanotechnology and Its Applications in Chemical, Food and Agricultural Industries, Kasetsart Fabrication of Graphene-based Electrodes for Uses in Supercapacitors Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart University and Center for Advanced Studies in Nanotechnology and Its Applications in Chemical, Food and Agricultural Industries, Kasetsart Synthesis, Characterization, and Supercapacitance Properties of Silver-doped Polyaniline Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart University and Center for Advanced Studies in Nanotechnology and Its Applications in Chemical, Food and Agricultural Industries, Kasetsart Preparation of NiO-Ni2Al2O3 Composite and Its Feasibility to use as an External Support for SOFC Anuwat Srisuwan Department of Materials Science, School of Science, Mae Fah Luang UniversityMaterials for Solar Water Disinfection Redesign Sittha Sukkasi National Metal and Materials Technology Center Material Reliability MR-PP-01 Inhibitive Effects of Terminalia catappa L. Extract on the Corrosion of Steel in 1 M HCl using Weight Loss Technique Wanich Limwanich Faculty of Science and Technology, Rajamangala University of Technology SrivijayaConstructing Economical Reciprocating Test Machine for Wear Research Pratip Vongbandit Thailand Institute of Scientific and Technological ResearchEffects of Current Density and Particle Loading on the Codeposition of Ni-Ti Composite Coatings Sangthum Srikomol Department of Materials Engineering, Faculty of Engineering, Kasetsart UniversityStudy of a Natural Extract as an Environmentally-Friendly Corrosion and Scale Inhibitor for Recirculating Cooling Water System Jiraphan Pleanteangthume Materials Science and Engineering Graduate Programme, Faculty of Science, Mahidol University and Center for Surface Science and Engineering, Faculty of Science, Mahidol University Metals, Alloys and Intermetallic Compounds
M-PP-01 Study of the Preparation of Metals Surface for Characterization by EBSD Technique; Part I: Effect of Mechanical Polishing Ussadawut Patakham National Metal and Materials Technology CenterPolymer-based Materials
Effect of Sodium Chloride on Miscibility of Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Chindawan Punchangcharoen Department of Packaging and Materials Technology, Faculty of Agro-Industry, Kasetsart UniversityHalogenated Sorbitol Derivatives Using as Nucleating Agent and Their Effect on Orientation of Polypropylene Supatra Wangsoub Department of Chemistry, Faculty of Science, Naresuan University Properties of Thermoplastic Cassava Starch modified by Pectin Worawan Pattanasin Department of Chemistry, Faculty of Science, King Mongkut’s Institute of Technology LadkrabangPreparation of Poly(lactic acid) Porous Flat Membranes via Phase Separation Method Arisa Jaiyu Thailand Institute of Scientific and Technological ResearchProperties of Thermoplastic Cassava Starch/Low-Density Polyethylene Blend modified by Carrageenan Wanida Pomdage Department of Chemistry, Faculty of Science, King Mongkut’s Institute of Technology LadkrabangEffect of Glycerol on Miscibility of Thermoplastic Starch/Poly(ethylene-co-vinyl alcohol) Blends Jitrawee Suk-ema Department of Packaging and Materials Technology, Faculty of Agro-Industry, Kasetsart UniversityThe Effect of Pipe Extrusion on Crystallization and Hydrostatic Resistance of Polyethylene Pipe Kunthalee Phutthasattha Synthesis of Polylactic Acid from Fermentative Lactic Acid by Direct Polycondensation and Its Degradation Behavior in Soi Lalita Ponmanee Department of Biotechnology, Faculty of Agro-Industry,Kasetsart UniversityCalcium Sensitive Pectin from Pomelo Peels Jaruwan Krongsin National Metal and Materials Technology Center Production of Poly-γ-glutamic acid by Bacillus licheniformis : Synthesis and Characterization Nuttawut Kongklom Department of Biotechnology, Faculty of Agro-Industry,Kasetsart UniversityCure Characteristic, Mechanical and Thermal Properties of NR/NBR Blend filled with Organic Modified Montmorrilonite (OMMT) Chanchai Thongpin Department of Materials Science and Engineering, Faculty of Engineering and Industrial Technology, Silpakorn Viscoelastic Models for Recycled Polymer HDPE Loaded by Constant Pressure Jan Pencik Institute of Civil Engineering, Faculty of Civil Engineering, Brno University of TechnologyMechanical Properties and Morphologies of PP/Co-PE/Talc Composites for Microwave Application Jakkrit Piwsawang Department of Packaging and Materials Technology ,Faculty of Agro-Industry ,Kasetsart UniversityStructure and Properties of Composites of Micro cellulose with Polypropylene: Effects of Micro Cellulose Pongpat Sukhavattanakul Department of Packaging and Materials Technology ,Faculty of Agro-Industry ,Kasetsart UniversityMechanical and Morphology Properties of Polypropylene/ Polyoxymethylene Blends Tanakorn Siripattanasak Department of Chemical Engineering, Faculty of Engineering and Industrial Technology, Silpakorn UniversityEffect of Molar Substitution on Physicochemical Characteristics of Hydroxypropyl Starches Thiraphong Sanga-Ngam Department of Manufacturing Pharmacy, Faculty of Pharmacy, Mahidol UniversityEffects of Cementitious Material Types for Concrete Column Repairs Sungnam Hong Department of Civil and Environmental Engineering, Sungkyunkwan University, Korea Effects of Different Polymer-base Hot-Melt Adhesives on Adhesive Bonding/Deboning in Slider Bar Lapping Application Supida Pokinsuwan Deparment of Chemical Engineering, Faculty of Engineering, Thammasat UniversityPreparation and Characterization of Highly Filled Graphite-Based Polybenzoxazine Composites for Bipolar Plate Application Anucha Pengdam Polymer Engineering Laboratory, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn Improving Mechanical Properties of Polypropylene Nanocomposite with Silica Nanoparticles: Size Dependence Montree Sawangphruk Department of Chemical Engineering, Faculty of Engineering, Kasetsart University and Center for Advanced Studies in Nanotechnology and Its Applications in Chemical, Food and Agricultural Industries, Kasetsart UniversitySynthesis and Characterization of a Novel Tin(II) Alkoxide Initiator for Use in The Ring-Opening Polymerization Natapol Jaisom Department of Chemistry, Faculty of Science, Maejo UniversityRadiation Curable Coating for Polyester Finishing Watcharinporn Phomsook Department of Materials Science, Faculty of Science, Chulalongkorn University Simulation, Design and Manufacturing
Experimental Investigation of De-oiling Hydrocyclone Kanawut Srirahong
MY REWARD Matthew 28:19-20 19Therefore go and make disciples of all nations, baptizing them in the name of the Father and of the Son and of the Holy Spirit, 20and teaching them to obey everything I have commanded you… I became acquainted with Tim Mastenbrook and his dedication to missions in Haiti many years ago. A little over five years ago my wife, Kischa, enrolled our family in h
Eur Arch Psychiatry Clin Neurosci (2006) xx:1–4Gabriele Ende Æ Traute Demirakca Æ Sigrid Walter Æ Tim Wokrina Æ Alexander SartoriusDirk Wildgruber Æ Fritz A. HennSubcortical and medial temporal MR-detectable metaboliteabnormalities in unipolar major depressionReceived: 3 January 2006 / Accepted: 27 June 2006 / Published online: 16 August 2006determine whether MR-detectable alterations o